TURBOVAC SERIES:
• Ideal for pick-up and removal of liquids, slurries and bulk solids
• Positive displacement blower: 2600 CFM to 5300 CFM, 27” Hg maximum vacuum
• Pressurized product off-loading system via auxiliary vacuum/pressure pump
• Heavy duty hydraulic vibrator assembly with speed control
• Options available i.e., baffle, high-pressure wash systems, SS tank, hydraulic boom, Hepa filtration, accessories, etc.
• Available in D.O.T 407/412 configuration |
PERFORMANCE & CHASIS DATA
|
MODELE:
|
2627 |
| Noise Level 9 ft. distance: |
92 dbA |
| Maximum CFM Blower: |
2600 |
| CFM @ 15”: |
438 |
| Maximum Vacuum: |
27" Hg |
| Maximum Pressure PSI: |
15 |
| Clear CA: |
172" |
| Required Front Axle: |
18,000 lb. |
| Required Rear Axle: |
46,000 lb. |
| Horsepower: |
300 |
| Transmission requirements: |
Overdrive w/cooler |
MODEL:
|
3827 |
| Noise Level 9 ft. distance: |
95 dbA |
| Maximum CFM Blower: |
3800 |
| CFM @ 15”: |
2250 |
| Maximum Vacuum: |
27" Hg |
| Maximum Pressure PSI: |
15 |
| Clear CA: |
190" |
| Required Front Axle: |
20,000 lb. |
| Required Rear Axle: |
46,000 lb. |
| Horsepower: |
350 |
| Transmission requirements: |
Overdrive w/cooler |
MODEL:
|
5327 |
| Noise Level 9 ft. distance: |
95 dbA |
| Maximum CFM Blower: |
5300 |
| CFM @ 15”: |
4141 |
| Maximum Vacuum: |
27" Hg |
| Maximum Pressure PSI: |
15 |
| Clear CA: |
200 " |
| Required Front Axle: |
20,000 lb. |
| Required Rear Axle: |
46,000 lb. |
| Horsepower: |
425 |
| Transmission requirements: |
Overdrive w/cooler |
|
| Tank Material: |
Head: 0.3125” SA516-70 |
| Shell: |
0.3125” SA516-70 |
| Diameter: |
78" |
| Blower: |
Airflow: 2600-5300 CFM Max Vacuum: 28”Hg |
| Off Loading Pump: |
Mode: PM100 Pressure: 15 PSI |
| Blower Drive: |
Model: Hayes Dana transfer case or belt drive from 8 bolt PTO |
| Isolation Valve: |
Single or dual 8” air operated butterfly valves |
| Shut-off: |
Primary: 12” SS float ball assy with 8” rubber seat |
| Filtration: |
Single or dual 8” cyclone assemblies with 100 micron blower inlet filter |
| Liquid Level Indicator: |
SS rotary float gauge with 6” SS float ball and sight cage assy |
| Blower Piping: |
Single or dual 8” diameter with quick disconnect rubber boot assy
6” manual vacuum relief valve with 10” or 12” check valve |
| |
Intake: 10” or 12” absorption Exhaust: 10” or 12” chamber |
| Valves: |
Suction/Discharge: 6” Betts air operated/spring closing |
| Dump System: |
Hydraulic: 30 ton capacity 120” stroke, 3 stage |
| Rear Door: |
Hydraulic: full opening with 6 heavy duty wing clamps |
| Vibrator: |
Hydraulic: mounted bottom of tank |
|
